Machinery‎ > ‎

Slanetrac

   SA Series Tractor Front Loader Finger Bar


The SA-1000 Swivel Trim Tractor Front Loader Finger Bar Hedge Trimmer is a quick and easy system allowing you to perform neat hedge trimming. This system is connected to the tractor hydraulics so you need a tractor with a suitable hydraulic flow for it to operate properly. Eighty horse power upwards is recommended. The best way to do this is to bring two hydraulic hoses from the rear of the tractor and connect them to the hedge cutter. The extra exhillary on the loader can be connected to the hydraulic ram. This allows you to move the hedge cutter from horizontal to vertical. This product has a spring break away which protects the cutting head. It is very easy to use because you are cutting straight ahead of you and the steering is very responsive to your cut. You can reach good highs with your loader and gives you a neat and even cut.
By the removing of one pin, you can easily swivel the head to the opposite side. This allows you to cut down behind fences and it also allows you to cut into corners. This operation is very difficult with other hedge cutters.







HC Series Finger Bar Hedge Cutter Attachmentnt

The Slanetrac HC Series Mini Digger Hedge Cutter range is designed for mini diggers from 0.8 ton to 7.5 ton.



The hydraulically powered reciprocating finger bar allows for fast and neat cutting of hedges. For best results while heavy cutting the operator can use the slewing movement of the digger to cut through thick heavy growth, while for finer, lighter breasting of the hedge the operator can use the tracking movement to get the desired finish.

Designed to allow cutting to take place at any angle between horizontal and vertical via the adjustable mounting bracket it allows the operator better access to those hard to get places like behind fences and allows the operator to cut close to and around obstacles such as telephone poles offering greater versatility compared to flail options.

With a cutting thickness of up to 40mm the Slanetrac HC Series Mini Digger Finger Bar Hedge Cutter offers clean cuts allowing for neat tidy hedges with more satisfactory conditions for re-growth compared to flail cutting attachments as well as ensuring minimum disturbance for wild life.



1.5m or 1.8m options


Individually Replaceable Cutting Sections


Cuts up to 40mm Thickness


Connect to Rock Breaker Lines







FH80 Flail Cutter




The Slanetrac FH80 Mini Digger Flail Cutter Attachment is designed for mini diggers from 1.5 ton to 2.5 ton.Available in a 800mm width; there is a Slanetrac HC Series Mini Digger Flail Cutter Attachment to suit a wide range of machines. The robust low maintenance Slanetrac HC Series Mini Digger Flail Cutter has individually replaceable cutting blades come supplied with adjustable mounting brackets to suit your particular machine and hydraulic pipes to connect to your machines rock breaker lines for fast effortless installation.

Designed to allow cutting to take place at any angle between horizontal and vertical via the adjustable mounting bracket it allows the operator better access to those hard to get places like behind fences and allows the operator to cut close to and around obstacles.

With a cutting area of up to 1000mm the Slanetrac HC Series Mini Digger Finger Bar Hedge Cutter offers clean cutting of scrub, gorse, briars and overgrown grass areas.

Machine Carrier: 1.5T – 2.5T

  • Oil Flow: 20L – 30L
  • Model: FH-80
  • Cutting Diameter: 800mm



FH100 Flail Cutter



The Slanetrac FH100 Mini Digger Flail Cutter Attachment is designed for mini diggers from 3.0 ton to 7.5 ton. Available in a 1000mm width; there is a Slanetrac HC Series Mini Digger Flail Cutter Attachment to suit a wide range of machines. The robust low maintenance Slanetrac HC Series Mini Digger Flail Cutter has individually replaceable cutting blades come supplied with adjustable mounting brackets to suit your particular machine and hydraulic pipes to connect to your machines rock breaker lines for fast effortless installation

Designed to allow cutting to take place at any angle between horizontal and vertical via the adjustable mounting bracket it allows the operator better access to those hard to get places like behind fences and allows the operator to cut close to and around obstacles. With a cutting area of up to 1000mm the Slanetrac HC Series Mini Digger Finger Bar Hedge Cutter offers clean cutting of scrub, gorse, briars and overgrown grass areas.

  • 1000mm width
  • Individually Replaceable Cutting Blades
  • Connect to Rock Breaker Lines

Machine Carrier – 2.8T – 7.5T

  • Oil Flow: 50L – 90L
  • Model: FH-1000
  • Cutting Diameter: 1000mm



HS55 Saw Head


The Slanetrac HS55 Mini Digger Saw Head Attachment is available for mini diggers ranging from 2 ton to 7.5 ton. The robust Slanetrac HS55 Mini Digger Saw Head Hedge Cutter Attachment comes with a high speed carbon steel 550mm blade to ensure a low maintenance and efficient attachment for your digger. Supplied with an adjustable mounting bracket to suit your machine, as well as hydraulic pipes to connect to your breaker lines for fast, effortless installation.

Designed to allow cutting take place at any angle between horizontal and vertical via the adjustable mounting bracket and compact stature of the saw head allows the operator to cut close to and around obstacles such as telephone poles offering greater versatility than flail without compromising safety.

With an ability to cut up to 150mm diameter material the Slanetrac HS55 Mini Digger Saw Head Hedge Cutter Attachment presents the operator with a great all round tool that can deal with rougher thicker hedges and bows whilst still having the ability to produce neat, tidy hedges with clean cuts with more satisfactory conditions for re-growth fast, efficiently and safely.


Machine Carrier – 2 – 4T

  • Oil Flow: 25l to 50l / Min
  • Model: HS55 SAX5



HS75 Saw Head



The HS75 Saw Head Attachment provides the ability to cut denser material than the HS55; cutting up to 250mm thickness using a blade diameter of 750mm.

Machine Carrier – 3.5 – 7.5T

  • Oil Flow: 35l to 90l / Min
  • Model: HS75 SAX8



Comments