Embedded Files
Tractor Mounted - A range of 7 different tractor rear mounted models from basic farmer to professional contractor type with combined slew and backshift functions.
P180
Standard configuration
210kg driver weight
quick release post cap plate with reinforced rubber for noise reduction
manual swing around slew with 180 degree movement and 5 working positions
adjustable rear leg for improved stability
open mast design for excellent visibility and allows posts to be knocked in after wire is put up
category 1 and 2 three point linkage
oil impregnated nylon bushes pivots
20mm diameter high strength double braided rope
A manual 5 position swing around rear mounted post driver for the farmer/occasional user. Equipped with a 180 kg hammer and quick release post cap plate.
Previous
Next
Options
external valve control option for improved visibility and control
hydraulic top link option to obtain forward / backward tilt of your mast
---------------------------------------------------------------------------------------------------------------------------------------
P200s
Standard configuration
240 kg hammer weight and capable of driving up to 10ft tall posts
external lever controls for improved operation and safety
250mm telescopic side shift for improved machine adjustment and compact transport positon
hydraulic powered slew with a massive 120 deg working area
20 degree forward and back hydraulic mast tilt, 35 degree side to side hydraulic mast tilt
quick release 270mm throat width gripper plate with reinforced rubber for noise reduction
adjustable front and rear legs
A fully hydraulic rear mounted post driver designed for the farmer/contractor. Equipped with a 240 kg hammer, 120 degree hydraulic slew with 250mm telescopic extensions and mast tilts.
Options
60mm rock spike and hydraulic extractor kit for piloting holes through hard and rocky ground conditions
hydraulic rear leg with 300mm travel
mast leg extension for deer fencing
-----------------------------------------------------------------------------------------------------------------------------------------
P230S
Standard configuration
250 kg hammer weight and capable of driving up to 10ft tall posts
external lever controls for improved operation and safety
500mm telescopic side shift for improved machine adjustment and compact transport position
hydraulic powered slew with a massive 120 deg working area
35 degree either side mast angle tilt
quick release 300mm throat width gripper plate with reinforced rubber for noise reduction
Hydraulic mast leg
A fully hydraulic rear mounted post driver for the farmer/contractor. It is equipped with a 250 kg hammer, 120 degree slew with 500mm telescopic extension and mast tilts.
Options
300 kg in lieu of 250 kg driver weight
1m telescopic mast giving 4.1m max working height
300 kg hydraulic counterweight with 500mm sideshift for increased stability
75mm rock spike and hydraulic extractor kit for piloting holes through hard and rocky ground conditions
Independent hydraulic front legs
--------------------------------------------------------------------------------------------------------------------------------------------------
P230s
Standard configuration
250 kg hammer weight and capable of driving up to 10ft tall posts
external lever controls for improved operation and safety
800mm telescopic side shift for improved machine adjustment and compact transport position
hydraulic powered slew with a massive 120 deg working area
35 degree either side mast angle tilt
quick release 300mm throat width gripper plate with reinforced rubber for noise reduction
Hydraulic mast leg
A fully hydraulic rear mounted post driver for the farmer/contractor. It is equipped with a 250 kg hammer, 120 degree slew with 800mm telescopic extension and mast tilts.
Options
300 kg in lieu of 250 kg driver weight
1m telescopic mast giving 4.1m max working height
300 kg hydraulic counterweight with 800mm side shift for increased stability
75mm rock spike and hydraulic extractor kit for piloting holes through hard and rocky ground conditions
Independent hydraulic front legs
-------------------------------------------------------------------------------------------------------------------------------------------------
P300S
Standard configuration
300 kg hammer weight and capable of driving up to 10ft tall posts
external lever controls for improved operation and safety
800mm telescopic side shift for improved machine adjustment and compact transport position
hydraulic powered slew with a massive 120 deg working area
35 degree either side mast angle tilt
quick release 300mm throat width gripper plate with reinforced rubber for noise reduction
Hydraulic mast leg
A fully hydraulic rear mounted post driver for the farmer/contractor. It is equipped with a 300-350 kg hammer, 120 degree slew with 800mm telescopic extension and mast tilts.
Previous
Next
Options
350 kg in lieu of 300 kg driver weight
300 kg hydraulic counterweight with 800mm side shift for increased stability
75mm rock spike and hydraulic extractor kit for piloting holes through hard and rocky ground conditions
Independent hydraulic front legs
---------------------------------------------------------------------------------------------------------------------------------------------
P400S
Standard configuration
300 kg hammer weight and capable of driving up to 12ft tall posts
hydraulic counterweight with 800mm side shift for increased stability
1m telescopic mast giving 4.1m max working height
external lever controls for improved operation and safety
800mm telescopic side shift for improved machine adjustment and compact transport position
hydraulic powered slew with a massive 120 deg working area
35 degree either side mast angle tilt
quick release 400mm throat width gripper plate with reinforced rubber for noise reduction
Independent hydraulic front legs
Hydraulic mast leg
A fully hydraulic rear mounted post driver for contractors. It is equipped with a 400 kg hammer, 120 degree slew with 800mm telescopic extension and mast tilts.
Previous
Next
Options
350 kg / 400kg in lieu of 300 kg driver weight
75mm rock spike and hydraulic extractor kit for piloting holes through hard and rocky ground conditions
---------------------------------------------------------------------------------------------------------------------------------------------
P500S
Standard configuration
350 kg hammer weight and capable of driving up to 12ft tall posts
500mm hydraulic backshift
hydraulic counterweight with 800mm side shift
1m telescopic mast giving 4.1m max working height
external lever controls for improved operation and safety
800mm telescopic side shift for improved machine adjustment
hydraulic powered slew with a massive 120 deg working area
35 degree either side mast angle tilt
quick release 400mm throat width gripper plate with reinforced rubber for noise reduction
close coupled transport position
Independent hydraulic front legs
Hydraulic mast leg
Toolbox
Road lights
Drawbar
A contractors machine, fully hydraulic rear mounted post driver equipped with both 500mm of back shift and 120 degrees of slew with 800mm telescopic extension. A range of 350 – 500kg hammer weights are available combined with hardox steel mast for excellent durability and strength.
Previous
Next
Options
400 kg / 500kg in lieu of 350 kg driver weight
75mm rock spike and hydraulic extractor kit for piloting holes through hard and rocky ground conditions
Hydraulic 6” X 3” post twister
Google Sites
Report abuse